• <td id="eizs8"><strike id="eizs8"></strike></td>
    <object id="eizs8"><label id="eizs8"><menu id="eizs8"></menu></label></object>

    追求精工品質  鑄造行業品牌
    SEIKO QUALITY CASTING INDUSTRY BRAND
    以優質的服務團隊和優良的產品打造行業第一品牌
    聯系我們
    產品中心

    Tektronix 80CXX系列模組

    Specifications

    All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

    Selection guide for 10Gb/s telecom and datacom applications
      80C08D 80C11B 80C12B 80C14
    F0-F12 10G 10GP
    Wavelength range (nm) 700-1650  1100-1650  700-1650  700-1650 
    Calibrated wavelength (± 20 nm) 780 
    850 
    1310 
    1550 
    1310 
    1550 
    850 
    1310 
    1550 
    850 
    1310 
    1550 
    Unfiltered optical bandwidth 12.5 GHz 30 GHz 12 GHz 1 >13 GHz
    Fiber input (μm) 2 62.5  62.5  62.5 
    Typical mask test sensitivity (dBm) -16  3 -103 -19  4 -15  -15  -15 
    RMS optical noise (typical at 1310 nm) 5 1.7 μw 5.5 μw (≤14 Gb/s)
    7.0 μw (14 Gb/s)
    10.0 μw (20 GHz)
    20.0 μw (30 GHz)
    0.7 μw (≤2 Gb/s)
    0.9 μw (>2 Gb/s, ≤4.5 Gb/s)
    1.2 μw (> 4.5 Gb/s, ≤7.4 Gb/s)
    1.7 μw (>7.4 Gb/s, ≤8.5 Gb/s)
    2.0 μw (>8.5 Gb/s)
    1.3 μw (≤12.5 Gb/s)
    1.9 μw (>12.5 Gb/s)
    RMS optical noise (max at 1310 nm)5 3.0 μw 8.0 μw (≤14 Gb/s)
    10.0 μw (14 Gb/s)
    14.0 μw (20 GHz)
    30.0 μw (30 GHz)
    1.3 μw (≤2 Gb/s)
    1.5 μw (>2 Gb/s, ≤4.5 Gb/s)
    2.2 μw (>4.5 Gb/s, ≤7.4 Gb/s)
    2.7 μw (>7.4 Gb/s, ≤8.5 Gb/s)
    3.6 μw (>8.5 Gb/s)
    2.5 μw (≤12.5 Gb/s)
    3.5 μw (>12.5 Gb/s)
    Optical return loss -single-mode (dB) >24  >30  >24  >24 
    Optical return loss -multi-mode (dB) >14  N/A >14  >14 
    Power meter range 6 0 dBm to -30 dBm +4 dBm to -30 dBm +0 dBm to -30 dBm +0 dBm to -30 dBm

    1When ordered with only F1-F12 filter options, the maximum optical bandwidth of the 80C12B is constrained by the highest bit-rate filter.

    2Modules with fiber inputs of 62.5 μm can accommodate 9 μm (single-mode) as well as 50 μm and 62.5 μm (multi-mode) fibers.

    3When ordered with clock recovery options, the mask test sensitivity of the 80C08D and 80C11B is reduced by 1 dBm.

    4The mask test sensitivity of the 80C12B is -22 dBm for filter rates < 1.250 Gb/s.

    5The RMS optical noise (both typical and maximum) for wavelengths other than 1310 nm is obtained by multiplying the values in the table above by the following factors: 1 × for 1550 nm, 2 × for 850 nm

    6Power meter accuracy = 5% of reading + connector uncertainty for 1550 nm ±20 nm and 1310 nm ±20 nm.

    Selection guide for PAM4 for 50G/100G/200G/400G applications, PAM2/NRZ for 100 Gb/s and 40 Gb/s telecom and datacom applications
      80C10C 80C15 80C17, 80C18 80C20, 80C21
    F1 F2 F3
    Wavelength range (nm) 1290 - 1620  800 - 1600  800 - 1600  1200 - 1650 
    Calibrated wavelength (± 20 nm) 1310 
    1550 
    850 
    1310 
    1550 
    850 
    1310 
    1550 
    1310 
    1550 
    Unfiltered optical bandwidth 70 GHz 55 GHz 80 GHz >32 GHz >30 GHz 53 GHz
    Fiber input(μm) 1 62.5  50 
    Typical mask test sensitivity (dBm) -6 at 1310 nm 23 -8 at 1310 nm 4 -14 at 1310 nm 4 -10 at 1310 nm
    RMS optical noise (typical at 1310 nm) 5 15.6 μw (25.78 Gb/s)
    16.9 μw (27.95, 28.0 Gb/s)
    18.2 μw (32 GHz)
    23.4 μw (39.81, 43.02 Gb/s)
    29.9 μw (55 GHz)
    46.8 μw (70 GHz)
    71.5 μw (80 GHz)
    10.3 μw (25.78 Gb/s)
    10.3 μw (26.5625 Gb/s)
    10.3 μw (TDECQ)
    10.3 μw (27.95, 28.0 Gb/s)
    12.2 μw (32 GHz)
    3.1 μw (TDEC 16.8 GHz)
    3.9 μw (25.78 Gb/s)
    4.2 μw (26.5625 Gb/s )
    4.3 μw (27.95 Gb/s, 28.05 Gb/s)
    3.2μw (17 GHz)
    3.5 μw (22 GHz)
    5.4 μw (30 GHz)
    9.3 μw (27.78 Gb/s, 26.5625 Gb/s)
    9.3 μw (27.95 Gb/s, 28.05 Gb/s)
    9.6 μw (35 GHz)
    9.8 μw (39.81 Gb/s, 41.25 Gb/s)
    10.3 μw (43.02 Gb/s)
    12.3 μw (53 GHz)
    RMS optical noise (max at 1310 nm)5 23.4 μw (25.78 Gb/s)
    26.0 μw (27.95, 28.0 Gb/s)
    28.6 μw (32 GHz)
    37.7 μw (39.81, 43.02 Gb/s)
    52.0 μw (55 GHz)
    84.5 μw (70 GHz)
    130.0 μw (80 GHz)
    12.2 μw (TDEC 16.8 GHz)
    12.2 μw (25.78 Gb/s)
    12.2 μw (26.5625 Gb/s)
    12.2 μw (27.95, 28.0 Gb/s)
    14.1 μw (32 GHz)
    3.6 μw (TDEC 16.8 GHz)
    4.5 μw (25.78 Gb/s)
    4.8 μw (26.5625 Gb/s)
    5.0 μw (27.95 Gb/s, 28.05 Gb/s)
    3.6 μw (17 GHz)
    4.0 μw (22 GHz)
    6.7 μw (30 GHz)
    11.8 μw (27.78 Gb/s, 26.5625 Gb/s)
    11.8 μw (27.95 Gb/s, 28.05 Gb/s
    12.7 μw (35 GHz)
    12.7 μw (39.81 Gb/s, 41.25 Gb/s)
    13.7 μw (53 GHz)
    13.3 μw (43.02 Gb/s)
    Optical return loss -single-mode (dB) >30  >24  >16  >25 
    Optical return loss -multi-mode (dB) N/A >14  >16  NA
    Acquisition delay adjustment range on each channel N/A N/A ±65 ps ±65 ps
    Power meter range 6 +13 dBm to -21 dBm +0 dBm to -30 dBm +6 dBm to -38 dBm +6 dBm to -38 dBm

    1Modules with fiber inputs of 62.5 μm can accommodate 9 μm (single-mode) as well as 50 μm and 62.5 μm (multi-mode) fibers. Modules with fiber inputs of 50 μm can accommodate 9 μm (single-mode) fibers.

    2When ordered with clock recovery trigger pick-off option (option CRTP), the mask test sensitivity of the 80C10C is reduced by 1 dBm.

    3Low ER signals (ER ≤ 6 dB): signal passes 802.3ae-like mask (scaled horizontally for bit rate); 105 samples in mask. High ER signals (ER > 6 dB): signal passes OC-192-like mask (scaled horizontally for bit rate); 105 samples in mask. Sensitivity expressed as minimum AOP of a high ER signal that passes an ideal signal.

    4The mask test sensitivity of the 80C15/17/18 is reduced by 3 dB for 850 nm signals.

    5The RMS optical noise (both typical and maximum) for wavelengths other than 1310 nm is obtained by multiplying the values in the table above by the following factors— 80C10C: 0.77 for 1550 nm, 80C15: 1.06 for 1550 nm and 0.67 for 850 nm, 80C17/18: 1.1 for 1550 nm, 1.66 for 850 nm.

    6Power meter accuracy = 5% of reading + connector uncertainty for 1550 nm ±20 nm and 1310 nm ±20 nm.

    Selection guide for tributary telecom and datacom applications
      80C07B 80C12B
    F0-F12 10G 10GP
    Wavelength range (nm) 700-1650  700-1650 
    Calibrated wavelength (± 20 nm) 780 
    850 
    1310 
    1550 
    850 
    1310 
    1550 
    Unfiltered optical bandwidth 2.5 GHz 12 GHz 1
    Fiber input (μm) 2 62.5  62.5 
    Typical mask test sensitivity (dBm) -22  -19  3 -15  -15 
    RMS optical noise (typical at 1550 nm) 4 0.5 μw (≤1.25 Gb/s)
    0. 7 μw (>1.25 Gb/s)
    0.7 μw (≤2 Gb/s)
    0.9 μw (>2 Gb/s, ≤4.5 Gb/s)
    1.2 μw (> 4.5 Gb/s, ≤7.4 Gb/s)
    1.7 μw (>7.4 Gb/s, ≤8.5 Gb/s)
    2.0 μw (>8.5 Gb/s)
    RMS optical noise (max at 1550 nm)4 1.0 μw (≤1.25 Gb/s)
    1.5 μw (>1.25 Gb/s)
    1.3 μw (≤2 Gb/s)
    1.5 μw (>2 Gb/s, ≤4.5 Gb/s)
    2.2 μw (>4.5 Gb/s, ≤7.4 Gb/s)
    2.7 μw (>7.4 Gb/s, ≤8.5 Gb/s)
    3.6 μw (>8.5 Gb/s)
    Optical return loss -single-mode (dB) >24  >24 
    Optical return loss -multi-mode (dB) >14  >14 
    Power meter range 5 +4 dBm to -30 dBm +0 dBm to -30 dBm

    1When ordered with only F1-F12 filter options, the maximum optical bandwidth of the 80C12B is constrained by the highest bit-rate filter.

    2Modules with fiber inputs of 62.5 μm can accommodate 9 μm (single-mode) as well as 50 μm and 62.5 μm (multi-mode) fibers.

    3The mask test sensitivity of the 80C12B is -22 dBm for filter rates < 1.250 Gb/s.

    4The RMS optical noise (both typical and maximum) for wavelengths other than 1550 nm is obtained by multiplying the values in the table above by the following factors: 1 × for all calibrated wavelengths

    5Power meter accuracy = 5% of reading + connector uncertainty for 1550 nm ±20 nm and 1310 nm ±20 nm.

    Supported filter rates and clock recovery
    Standard Rate 80C07B 1 80C08D 80C10C 80C11B 80C12B 80C14 80C15
    F1 F2 F3 F0-F12 2 10G 10GP 3
    OC3, STM1 155 Mb/s                
    OC12, STM4 622 Mb/s                
    Fibre Channel 1.063 Gb/s                
    Gigabit Ethernet 1.250 Gb/s                
    2G Fibre Channel 2.125 Gb/s                
    OC48, STM16 2.488 Gb/s                
    2G Ethernet 2.500 Gb/s                
    2.5G G.709 FEC 2.66 Gb/s                  
    XAUI, 10GBase-X 3.125 Gb/s                  
    10 G Fibre Channel x4 3.188 Gb/s                  
    4G Fibre Channel 4.250 Gb/s                  
    OBSAI 6.144 Gb/s                  
    CPRI 7.373 Gb/s                  
    8G Fibre Channel 4 8.500 Gb/s              
    OC192, STM64, 10GBase-W 9.953 Gb/s            
    10GBase-R4 10.31 Gb/s            
    10G Fibre Channel 10.52 Gb/s            
    G.975 FEC 10.66 Gb/s            
    G.709 FEC 10.71 Gb/s            
    10 GbE w, FEC 11.10 Gb/s            
    Super FEC 12.50 Gb/s            
    16G Fibre Channel 14.025 Gb/s                    
    14G Infiniband FDR 14.063 Gb/s                    
    TDECQ, PAM4 26.56 Gb/s                      
    100GBASE -SR4 and TDEC and 25G Infiniband EDR 25.78 Gb/s                    
    OTU-4  27.95 Gb/s                
    32G Fibre Channel 28.05 Gb/s                    
    OC768, STM256 39.81 Gb/s                  
    40GBase-FR 41.25 Gb/s                  
    OTU-3, VSR-200G.693, G.959.1 FEC 43.02 Gb/s                  
    OTU3 44.5 Gb/s                  
    PAM4 TDECQ 53.125 GBd                  
    64GFC 57.8 GBd                  
    Clock recovery support Internal (option) Internal (option) External (requires option CRTP or option HSPR; maximum speed 44 Gb/s PAM2 or 28.05 GBd PAM4) Internal (option) External (for example, CR125A) External (for example, CR286A-HS) External (for example, CR286A-HS; requires option CRTP)
    Standard Rate

    80C17

    80C18

    80C20

    80C215

    PAM4 26.5625 GBd (TDECQ)
    53.125 GBd (TDECQ) ■ 65
    NRZ 25.78 GBd (TDEC-MM)  
    25.78 GBd
    28.05 GBd
    27.95 GBd
    Clock recovery support External (for example, CR286A-HS; requires option CRTP, maximum speed 28.05 GBd NRZ and PAM4 7)  

    12.488 and 2.500 Gb/s filters are standard with 80C7B. Select any two of the additional four filter rates when ordering (see Ordering information).

    2You can configure 80C12B to support any 4 of the 12 < 10 Gb/s rates indicated (see Ordering information).

    3Use option 10GP to configure the 80C12B to support any 3 of the 12 <10 Gb/s rates indicated, as well as the 10-12 Gb/s rates (see Ordering information).

    4Draft version of 8.5 G Fibre Channel. New 8.5 GFC filter is identical to the 10GBASE-R 10.31 Gb/s filter.

    5Reference receiver filtering enabling conformance testing at either 1310 nm or 1550 nm requires the use of DSP, bandwidth enhancement available in 400G-M4 or 80SJNB software applications, patterns only.

    6Requires option IMP.

    728.05 GBd PAM4 clock recovery requires > -12dBm OMA outer at CRTP input when used with CR286A-HS.

    Extinction ratio calibration accuracy

    Extinction ratio calibrated accuracy (Opt. 01 ER calibrated)1

    Module 2 Reference filter in range (Gb/s) Repeatability, typical (to itself and to other 80Cxx-Opt. 01) Accuracy
    80C08D, 80C11B 9.9 - 12.5  ±0.6% (–0.39 dB / +0.42 dB at 12 dB) ±1.2% (–0.76 dB / +0.92 dB at 12 dB)
    80C12B 0.155 - 11.3 

    1Low ER signals (ER ≤ 6 dB): signal passes 802.3ae-like mask (scaled horizontally for bit rate); 105samples in mask. High ER signals (ER > 6 dB): signal passes OC-192-like mask (scaled horizontally for bit rate); 105samples in mask.

    2Opt. 01 not available for 80C7B, 80C10C, or 80C14.

    Dimensions and weight
      Width Height Depth
    All 80C00 modules 165 mm (6.5 in) 25 mm (1.0 in) 305 mm (12.0 in)
      Weight
    80C07B <1.36 kg (<3.0 lbs)
    80C08D 80C11B <1.22 kg (<2.7 lbs)
    80C10C 80C12B
    80C14
    80C15
    80C17
    80C18
    80C20
    80C21
    <2.61 kg (<5.75 lbs)
    真人一级毛片_久久久久久久99精品老熟妇_97人妻无码_国产黄色一区
  • <td id="eizs8"><strike id="eizs8"></strike></td>
    <object id="eizs8"><label id="eizs8"><menu id="eizs8"></menu></label></object>